|
Product Specifications
Krinklglas Fiberglass Reinforced Plastic Panels
GENERAL
Krinklglas® is a fiberglass reinforced copolymer UV stabilized plastic paneling for use in all standard glazing
applications. Standard panel sizes are 4'x8', 4'x10', 5'x8' and 5'x10', available in 1/8", 3/16" and 1/4" thicknesses.
Special sizes and thicknesses are available upon request.
IMPACT RESISTANCE
Krinklglas is virtually unbreakable and can withstand impact from such objects as projected stones, bricks and bottles
without shattering. The multifaceted textured surfaces "hide" scratches, and applying a thin polyurethane coating can
restore surface luster.
HURRICANE RESISTANCE
Because our panels use a special imported invisible fiberglass reinforcement, they can withstand impacts including a
two-by-four fired from a compressed air canon at 50 feet per second. Krinklglas passed the very demanding Miami-Dade
County Building Code tests for large missile impact and cyclic wind pressure with flying colors. Krinklglas panels
also meet the requirements of the South Florida Building Code subsections 3505.1 and 3505.2 as specified in Miami-Dade
County (State of Florida) Notice of Acceptance (NOA) No. 91-0820.2.
FLEXIBILITY
Krinklglas panels may be cold-bent or flexed for two-dimensional curved installations. Where site curvations may exceed
the natural flex range of a given panel size and thickness, panels can be custom made to the desired radius. Contact
Dimensional Plastics for further details on panel bending.
INSTALLATION
Krinklglas panels are easily installed using any standard or custom framing or mounting if allowance is made for
expansion and contraction of the panel and the variation of thickness due to the textured panel surfaces.
A clearance of 0.015" per foot on all dimensions is recommended, which amounts to less than 3/16" in a 10" panel length.
Minimum clearance should be 1/8". For larger area installations, bowing or sheet deflection must be taken into account,
especially for outdoor installations where the panel has to withstand wind forces.
The edge engagement or enlargement around the perimeter of the panels must be a minimum of 3/8" for spans under 24".
Above this size the edge engagement must be proportionately increased until a 1" stop is to be used in connection with
4'x10' lengths for exterior applications.
The two prism-like multifaceted or textured Krinklglas surfaces provide the unique light dispersion effect, but also
create up to 20% variations in the actual panel thickness in some areas. This thickness variation should be considered
when inserting panels into frames, extrusions, etc.
No special glazing procedures, framing extrusions, tape or mastic is needed with Krinklglas. Any quality construction
grade silicone sealant may be used to provide for any expansion or contracting without fear of leakage.
Krinklglas can be drilled and worked with common carpentry tools. Its fiberglass reinforcement prevents any shattering
or breaking. Panels can be cut on the job site by hand, utilizing a circular, band or saber saw. For best results,
use a carbide tipped or carborundum blade. For bolted or floating assemblies, use a flexible strip around both sides
of the inserted panel. The bolt holes must be drilled with an outside diameter (O.D.) equal to the O.D. of the screw
or bolt plus the allowance for expansion or contraction. Use a flexible neoprene type gasketing washer in the hole
of the panel to provide solid fitness and to avoid stresses when the bolts or screws are tightened. Bolts or screws
should be tightened only enough to prevent leakage, and must not be torqued or overtightened.
CLEANING
Krinklglas is resistant to most acids, mild alkalis and petroleum-based solvents. For basic cleaning use mild soap
and water. Graffiti, paint and other problem materials can be easily removed using common, non-abrasive cleansers
or solvents.
WARRANTY
Krinklglas panels are custom made with quality materials and UV inhibitors. Panels are warranted against manufacturing
defects. Product is warranted against severe color fading for five years from date of purchase.
view our showcase
read our specifications
get more information
|
Krinklglas
